Information

Desktop Reader

The DR-E/U-USB®  UHF RFID Desktop Reader is an integrated Gen2 RFID reader and writer.  It was specially designed for desktop applications. With its small and elegant factor, it is simple yet flexible to use. Because of its efficient RFID module and low power consumption, it is only powered by a standard USB port. We named the models 

ACACIA

which is derived from the Greek word 'akis'  meaning "sharp point".

With its excellent, well focused read/write performance we are confident to answer many existing and upcoming desktop based RFID applications.  The ACACIA comes with many software programs and SDK.

 

                          

FACTS and FIGURES

Regulatory Compliance for FCC 15.247, CE/ETSI (CE1177) , RoHS, EN 301489-1/3 and EMC

Right-Handed Circular 1.5dBi antenna

Fast tag reading with up to 200 tag/sec , 50 tag/sec typical

Verified with tags from:

Alien, Avery Dennison, Impinj, Mikoh, RSI/Sirit, TI, UPM Raflatac

PC connection:  Via USB 2.0

Transponders EPC Class 1 Generation 2, ISO18000-6C

Full implementation of Alien Higs-3 Custom Commands; e.g BlockReadLock().

Full implementation of NXP Custom Commands; e.g  EAS (Electronic Article Surveillance)

Environmental test and protocol for POS classification 

Tag independent (up to) 128-Byte block write for fast encoding.

Future protocols and optional EPC features supported through firmware updates.

RF power:  10 ~ 22 dBm

Read range:  Up to 150 cm (depending on tag type, settings and environmental conditions)

Input Power:  5V, 500mA  through USB 2.0  (standby current < 3mA)

Upgrade-able Firmware

LED indicators:  Power, Command and RFID activities

Operating Temperature:  -20°C to 70°C (-4°F to 158°F) non condensing

Storage Temperature:  -30°C to 85°C (-22°F to 185°F) non condensing

Measurements:  12 cm (l), x 8 cm (w) x 2.5 cm (h)

Weight:  180 g


Data sheets can be download from here:  

PDF Documents at Weblink section

If you have further questions don't hesitate to Contact us!